代表性学术论文： 1.GW Dong, GQ. Zhao, YJ Guan, GL Wang, XX Wang. The cell forming process of microcellular injection-molded parts. J. Appl. Polym. Sci., 2014. 2.GW Dong, GQ Zhao, YJ Guan, S Li, XX Wang. Formation mechanism and structural characteristics of unfoamed skin layer in microcellular injection-molded parts. J. Cell. Plast., 2015. 3.GW Dong, GQ Zhao, L Zhang, JJ Hou, B Li and GL Wang. Morphology Evolution and Elimination Mechanism of Bubble Marks on Surface of Microcellular Injection-Molded Parts with Dynamic Mold Temperature Control. Ind. Eng. Chem. Res., 2018. 4.GW Dong, GQ Zhao, JJ Hou, GL Wang, Y Mu. Effects of dynamic mold temperature control on melt pressure, cellular structure and mechanical properties of microcellular injection molded parts: an experimental study. Cell. Polym., 2019. 5.GL Wang, GQ Zhao, GW Dong, Y Mu, CB Park. Lightweight and strong microcellular injection molded PP/talc nanocomposite. Compos. Sci. Tech. 2018. 6.GL Wang, GQ Zhao, GW Dong, LB Song, CB Park. Lightweight, thermally insulating, and low dielectric microcellular high-impact polystyrene (HIPS) foams fabricated by high-pressure foam injection molding with mold opening. J. Mater. Chem. C 2018. 7.ZZ Wang, JC Zhao, GL Wang, ZR Xu, AM Zhang, GW Dong*, GQ Zhao. Lightweight, low-shrinkage and high elastic poly(butylene adipate-co-terephthalate) foams achieved by microcellular foaming using N2& CO2as co-blowing agents，J. CO2 Util.，2022. 8.T Hu， Y Mu，YQ Chen，CF Zhou，GQ Zhao，GW Dong*. Combined effects of nanoparticle and stretch-induced orientation on crystal structure and properties of UHMWPE/TiO2 composite microporous membranes，Polym. Compos.，2023. 9.D Quan, H Chen, L Qin, J Lin, GW Dong∗, GQ Zhao. Carbon fibre composite joints co-cured by advanced PEEK/PPS meshes with outstanding fracture toughness, Compos. Sci. Technol., 2023. 10.D Quan, L Qin, H Chen, J Liu, J Lin, GW Dong∗, GQ Zhao. Significantly enhanced joint strength and fatigue life of aerospace composite joints by using novel PEEK/PPS woven meshes as joining agent, Thin Wall Struct., 2024. 代表性发明专利/软著： 1.一种超临界流体计量注入装置及注入方法，201210430223.2 2.一种超临界流体增压计量装置，201210432233.X 3.一种聚合物微孔发泡注塑成型用螺杆，201410625465.6. 4.一种用于聚合物间歇发泡的超临界流体多阶压力控制系统及方法，201910012729.3 5.一种聚合物微孔发泡材料的注塑成型装置和工艺及其应用，201910394094 .8 6.一种双峰泡孔聚合物泡沫材料的制备装置及方法和应用，201910394060 .9 7.一种跟踪剪切机主机的参数化设计方法及系统，201911396376.8 8.一种模具型腔高压气体控制系统与控制方法，202110350906.6 9.一种轻量化导电隔热复合材料及其制备方法、系统，201711433855.3 10.一种压力流体辅助发泡注塑成型工艺，201711433926.X 11.剪切机设计系统V1.0，2020SR0045450. 12.超临界流体计量控制系统 V1.0，2021SR0597040 所获科研奖励： 1.山东省技术发明一等奖（2022） 2.山东省高等学校优秀科研成果三等奖（2014） |