性 别

女

学  位

博士

专业技术职务

高级实验师

硕导聘任时间

2021.03

行政职务

无

学术团体兼职

1. 学习和工作经历

2019/10-今，山东大学，材料科学与工程学院，高级实验师

2018/12-今，山东大学，机械工程学院，博士后

2011/01-2019/09， 山东大学， 材料科学与工程学院， 工程师

2005/09 - 2010/12，山东大学，材料工程系，博士，导师：赵国群

2001/09 -2005/07，山东大学，材料科学与工程系，大学本科

2. 研究领域介绍

(1) 聚合物微孔发泡技术与理论

(2) 聚合物材料物理改性

(3) 聚合物注塑成型新工艺及理论

3. 取得科研成果情况

入选山东省重点扶持领域稀缺人才、担任国家自然科学基金通讯评议人；担任Applied Surface Science，Polymer Testing，International Journal of Biological Macromolecules等杂志审稿人。2021年获得临沂市第二届“创业沂蒙共赢未来”高层次人才创业大赛三等奖；2022年参与项目获山东省技术发明一等奖；2010年参与项目获国家科学技术进步二等奖和山东省科学技术进步一等奖。

代表性科研论文：

(1)Aimin Zhang, Jiachang Wang, Guilong Wang, Lei Jiang, Xiangwei Meng, Guoqun Zhao. Microcellular injection molded lightweight, strong and thermally insulating PP/fibrillated-PTFE composite foams with enhanced surface appearance. Journal of Materials Research and Technology. 2023,22:2933-2943.

(2)Aimin Zhang, Jialong Chai, Chunxia Yang, Jinchuan Zhao, Guoqun Zhao, Guilong Wang*. Fibrosis mechanism, crystallization behavior and mechanical properties of in-situ fibrillary PTFE reinforced PP composites. Materials & Design. 2021, 211:110157.

(3)Aimin Zhang, Zhaozhi Wang, Yanjin Guan, Jinchuan Zhao, Guoqun Zhao, Guilong Wang. Strong PP/PTFE microfibril reinforced composites achieved by enhanced crystallization under CO₂ environment. Polymer Testing. 2022,112:107630

(4)Qingqing Zhang, Jinchuan Zhao, Guilong Wang, Aimin Zhang, Jialong Chai, Lei Jiang, Xiangwei Meng, Guoqun Zhao. Mechanically strong and heat-resistant waste poly (ethylene terephthalate) derived by carbon dioxide treatment at ambient temperature. Journal of Materials Research and Technology. 2023,25:3298-3313.

(5)Chunxia Yang, Guilong Wang, Jinchuan Zhao, Guoqun Zhao, Aimin Zhang. Lightweight and strong glass fiber reinforced polypropylene composite foams achieved by mold-opening microcellular injection molding. Journal of Materials Research and Technology. 2021,14: 2920-2931.

(6)Aimin Zhang, Guoqun Zhao, Jialong Chai, Junji Hou, Chunxia Yang, and Guilong Wang. Crystallization and Mechanical Properties of Glass Fiber Reinforced Polypropylene Composites Molded by Rapid Heat Cycle Molding, Fibers and Polymers, 2020, 21(12): 2915-2926.

(7)Guilong Wang， Dongmei Zhang， Bo Li， Gengping Wan， Guoqun Zhao， Aimin Zhang.  Strong and thermal-resistance glass fiber-reinforced polylactic acid (PLA) composites enabled by heat treatment. International journal of biological macromolecules. 2019, 129(15): 448-459.

(8)Aimin Zhang, Yang Hui, Junji Hou. Effect of resin viscosity and lubricants on surface and mechanical properties of glass fiber reinforced polymer in rapid heat cycle molding, Polymer Korea, 2018, 42(6): 974-981.

(9)Aimin Zhang, Guoqun Zhao, Yang Hui, Yanjin Guan, Mechanical and thermal properties of ABS/PMMA/Potassium titanate whisker composites. Polymer-Plastics Technology and Engineering. 2017, 56(4): 382-390.

(10)Aimin Zhang, Guoqun Zhao, Yanjin Guan, Effects of mold cavity temperature on surface quality and mechanical properties of nanoparticle-filled polymer in rapid heat cycle molding.  Journal of Applied Polymer Science. 2015, 132(6): 1-9.

(11)Aimin Zhang, Guoqun Zhao, Yanjin Guan, Effect of surface modifiers and surface modification methods on properties of acrylonitrile-butadiene-styrene/poly(methyl methacrylate)/nano-calcium carbonate composites. Journal of Applied Polymer Science. 2013, 127(4): 2520-2528.

(12)Aimin Zhang, Guoqun Zhao, Jun Gao, Yanjin Guan. Effect of acrylonitrile-butadiene- styrene high-rubber powder and strain rate on the morphology and mechanical properties of acrylonitrile-butadiene-styrene/poly (methyl methacrylate) blends. Polymer-Plastic Technology and Engineering, 2010, 49(3): 296-304.

(13)Aimin Zhang, Guoqun Zhao, Yanjin Guan, Guowen Chen.  Study on mechanical and flow properties of acrylonitrile-butadiene-styrene/Poly (methyl methacrylate)/nano-calcium carbonate composites. Polymer Composites, 2010, 31(9): 1593-1602.

(14)Yanyu Ding, Chaoqian Zhou, Baosheng Ren, Aimin Zhang, Guilong Wang. Cell structures, phase morphologies and impact toughness of phenolphthalein poly (ether ether ketone)/ epoxy composite foams. Polymer engineering and science, 2020,60:2133-2142.

(15)Xinyang Li, Guilong Wang, Chunxia Yang, Jinchuan Zhao, Aimin Zhang. Mechanical and EMI shielding properties of solid and microcellular TPU/nanographite composite membranes. Polymer testing 2021, 93: 106891.

(16)Jinchuan Zhao, Yifeng Huang, Guilong Wang, Yongna Qiao, Zuolong Chen, Aimin Zhang, Chul B. Park. Fabrication of outstanding thermal-insulating, mechanical robust and superhydrophobic PP/CNT/sorbitol derivative nanocomposite foams for efficient oil/water separation. Journal of Hazardous Materials. 2021,418:126295.

(17)Jialong Chai, Guilong Wang, Jinchuan Zhao, Aimin Zhang, Zhanlin Shi, Chao Wei, Guoqun Zhao. Microcellular PLA/PMMA foam fabricated by CO₂ foaming with outstanding shape-memory performance. Journal of CO₂ utilization. 2021,49:101553.

(18)Jiachang Wang, Guilong Wang, Jinchuan Zhao, Aimin Zhang, Guiwei Dong, Xiebin Wang, Guoqun Zhao, Chul B. Park. Research on cellular morphology and mechanical properties of microcellular injection–molded BCPP and its blends. The International Journal of Advanced Manufacturing Technology. 2021,116:2223-2241.

(19)Jinchuan Zhao, Guilong Wang, Aimin Zhang, Guoqun Zhao, Chul B. Park. Nanocellular TPU composite foams achieved by stretch-assisted microcellular foaming with low-pressure gaseous CO₂ as blowing agent. Journal of CO₂ utilization. 2021,53:101708.

(20) Jinchuan Zhao, Guilong Wang, Zuolong Chen, Yifeng Huang, Chongda Wang, Aimin Zhang, Chul B. Park. Microcellular injection molded outstanding oleophilic and sound-insulating PP/PTFE nanocomposite foam. Composites part B. 2021,215:108786.

(21)Zhaorui Xu, Guilong Wang, Jinchuan Zhao, Aimin Zhang, Guoqun Zhao. Super-elastic and structure-tunable poly(ether-block-amide) foams achieved by microcellular foaming Journal of CO₂ utilization. 2022,55:101807.

(22)Jinchuan Zhao, Guilong Wang, Weijun Zhu, Hongfu Zhou, Yunxuan Weng, Aimin Zhang, Guiwei Dong, Guoqun Zhao. Lightweight and strong polypropylene/talc/ polytetrafluoroethylene foams with enhanced flame-retardant performance fabricated by microcellular foam injection foaming. Materials & Design. 2022,215:110539.

发明专利：

(1) 张爱敏，白玉俊，耿贵立; 一种铜基记忆合金微区相变温度的实验方法，2019-04-02，中国，ZL 201610285354.4

(2) 张爱敏，白玉俊，耿贵立; 铜基记忆合金马氏体相变致使炉内温度回升的测定方法，2018-10-19，中国，ZL 201610272781.9

(3) 张爱敏，耿贵立，张芦元，高学平; 一种可自动复形的铜合金智能轿车外壳的制备方法，2020-06-23，中国，ZL20191.0906609.8

(4) 张爱敏，耿贵立，高学平，张芦元，孙国勋; 一种减震弹簧及其制备方法和应用，2020-10-09，中国，ZL201910924620.7

4. 承担科研项目情况

(1)国家自然科学基金委员会, 青年项目, 51905307,微发泡注塑成型轻质高强聚丙烯泡沫及其结构与性能研究，2020-01至2022-12，25万元，已结题，主持

(2)山东省重点扶持区域引进急需紧缺人才项目，高强高隔热玻璃纤维增强聚氨酯复合材料成形加工技术及其产业化，2022-06至2023-06，100万元，在研，主持

(3)中国博士后科学基金，面上项目，2019M662352，微发泡注塑原位微纤改性聚丙烯泡沫及其性能研究，2020-01至2021-12，8万元，在研，主持

(4)超隔热聚合物传热建模与制备，企业委托，2022-12至2024-5，40万元，在研，主持

(5)华中科技大学材料成形与模具技术国家重点实验室开放基金，P2020-012，微发泡注塑成型轻质高强聚丙烯泡沫及其结构调控方法研究，2020-01至2021-12，5万元，已结题，主持

(6)山东省自然科学基金，BS2015ZZ001，玻璃纤维增强热塑性聚合物快速热循环注塑成型机理研究，2015-07至2017-12，8万元，已结题，主持

(7)国家自然科学基金面上项目，51875318，超级隔热纳孔聚合物泡沫的传热机理及其二氧化碳发泡成形方法研究，2019-01至2022-12,60万元，在研，参加

(8)国家自然科学基金青年科学基金，51405267，超声与纳米流体辅助快速热循环注塑成型方法及关键技术研究，2015-01至2017-12，25万元，已结题，参加 

(9)山东省自然科学基金，2014ZRE27183，快速热循环注塑熔体流动行为及工艺控制方法研究，2014-12至2017-12，12万元，已结题，参加

联系方式

联系地址

山东济南经十路17923号山东大学材料学院

电子邮箱

zhangam@sdu.edu.cn