2014/02-至今，山东大学材料科学与工程学院金属材料研究所，讲师

2015/01-至今，山东大学材料科学与工程流动站，博士后

2009/10-2013/01，法国国立高等工艺技术学校 (Arts et Metiers ParisTech)，生产设计控制实验室(LCFC),博士

2008/10-2009/09，巴黎矿业大学 (Mines ParisTech)材料成形研究中心(CEMEF),专业硕士(Specialized Master in France)

2005/09-2008/01，北京航空航天大学机械工程及自动化学院航空宇航制造工程专业，硕士

研究领域介绍          

目前主要从事半固态金属材料的制备、触变锻造成形技术及成形过程数值模拟及优化。

取得科研成果情况          

(1) Guochao Gu*, Raphael Pesci, Laurent Langlois, Eric Becker, Regis Bigot, Muxing Guo, Microstructure observation and quantification of the liquid fraction of M2 steel grade in the semi-solid state, combining confocal laser scanning microscopy and X-ray microtomography, Acta Materialia, 2014, 66: 118-131

(2) Guochao Gu*, Raphael Pesci, Laurent Langlois, Eric Becker, Regis Bigot, Mario Scheel, Quantification and localization of the liquid zone of partially remelted M2 tool steel using X-ray microtomography and scanning electron microscopy，Acta Materialia, 2012, 60(3): 948-957

(3) Guochao Gu*, Raphael Pesci, Laurent Langlois, Eric Becker, Regis Bigot, Microstructure investigation and flow behavior during thixoextrusion of M2 steel grade, Journal of Materials Processing Technology, 2015, 216: 178-187

(4) Jinhe Dou, Guochao Gu*, Chuanzhong Chen, Effects of calcium salts on microstructure and corrosion behavior of micro-arc oxidation coatings on Mg-2Zn-1Ca-0.8Mn alloy, Materials Letters, 2017, 196: 42-45.

(5) Yiming Chi, Guochao Gu*, Huijun Yu, Chuanzhong Chen, Laser surface alloying on aluminum and its alloys: A review. Optics and Lasers in Engineering, 2018, 100: 23-37.

(6) Jinhe Dou, Chunyan Wang, Guochao Gu, Chuanzhong Chen. Formation of silicon-calcium-phosphate-containing coating on Mg-Zn-Ca alloy by a two-step micro-arc oxidation technique, Materials Letters, 2018, 212: 37-40.

(7) Guochao Gu*, Raphael Pesci, Laurent Langlois, Eric Becker, Regis Bigot, In situ microstructure observation of steel grades in the semi-solid state for thixoforging process by using confoncal laser scanning microscopy, Solid State Phenomena,2014, 217-218: 15-22

(8) Guochao Gu*, Raphael Pesci, Laurent Langlois, Eric Becker, Regis Bigot, Application of X-ray microtomography to quantify the liquid fraction of M2 steel for semi-solid forming process, Key Engineering Materials, 2013, 554-557: 547-552

(9) Guochao Gu*, Raphael Pesci, Laurent Langlois, Eric Becker, Regis Bigot, Determination of quantity and localization of liquid in the semi-solid state using both 3D X-ray microtomography and 2D techniques for steel thixoforming, Solid State Phenomena, 2013, 192-193: 191-196

(10) Zhidan Sun, Marc Bernacki, Roland Loge, Guochao Gu. Numerical simulation of mechanical deformation of semi-solid material using level-set based finite element method. Modelling & Simulation in Materials Science & Engineering, 2017. DOI: 10.1088/1361-651X/aa788e

(11) Gu, G.C.^*, Becker, E., Langlois, L., Pesci, R., Bigot, R.，Microstructure evolution and material flow of steel in semi-solid forming process, 10th International Conference on Technology of Plasticity, ICTP 2011, Aachen, Germany, 2011. 09.25-09.30     

承担科研项目情况          

1、国家自然科学基金-青年科学基金项目，51705292. 变形铝合金触变锻造过程中固液相协调变形机制及缺陷控制研究. 起止年月：2018/01 – 2020/12. 在研，主持。

2、山东省自然科学基金，ZR201702180340. 变形铝合金触变成形过程中材料流动行为试验研究及模拟计算. 起止年月：2017/08 – 2019/12. 在研，主持。

3、江苏省自然科学基金，BK20160369. 高固相率金属半固态瞬态流变行为及其多尺度材料本构模型的研究. 起止年月：2016/07 – 2019/06. 在研，主持。

4、中国博士后科学基金面上一等资助(第57批)，2015M570590. 高固相率半固态材料的多尺度有限元法及实验研究，起止日期：2015/07-2017/07. 8.0万、主持。

联系方式

0531-88392157        15053170637

联系地址

济南市经十路17923号山东大学千佛山校区材料科学与工程学院      

电子邮箱

guochaogu@sdu.edu.cn